Tri-Mor Alcoat
Tri-Mor Alcoat is a high alumina wash material designed to coat refractory surfaces. It is useful in furnaces, dispensers, ladles etc used in aluminium alloy contact applications. The wash coat is totally non-wetted by alloys and prevents build up of dross. It can be applied to the surfaces of fired or unfired refractories, insulation materials and cast iron. It is supplied ready mixed. Use neat, applying 2 coats, allowing drying between applications. Can be diluted with water. Avoid leaving open to the air as the coating will dry out. Water addition will bring the consistency back.
| Characteristics | |||||
| Bond Type | Air Setting | ||||
| Raw Material Base | Alumina | ||||
| Maximum Service Temperature °C | >1600 | ||||
| Refractoriness °C (Seger Cone) | 1750 (>34) | ||||
| Appearance | White Paste | ||||
| Packaging | 15kg Polydrums | ||||
| Method of Application | Painting | ||||
| Chemical Analysis (%) | |||||
| Al2O3 | 86 | ||||
| SiO2 | – | ||||
| TiO2 | – | ||||
| Fe2O3 | – | ||||
| Alks | – | ||||
| CaO | – | ||||
| MgO | – | ||||
| K2O | – | ||||
| Na2O | – | ||||
| B2O3 | 13 | ||||
| MgO | – | ||||
| Water Addition | Supplied ready mixed | ||||
| Rate of Useage | Approx 2m2/litre | ||||
| assuming undiluted and 2 coats | |||||
| Note : The above typical values shown are based on average test result on standard samples. Properties are subjected to reasonable variation based on product shape etc. and hence should be considered for general guidence only. The above data is determined by regular sample testing in accordance with British Standard 1902 (where applicable). Because normal manufacturing tolerances apply, the data should not be taken as a precise specification. | |||||
REFRAMAT furnishes quality industrial products across major industries, with prime focus on supply of Furnace Materials. we are serving the Steel Industry by host of products including supply of best quality Ferro Alloys. Our operations HO in New Delhi, covers several markets with our team putting constant endeavors to reach the clients for their Ferro Alloys needs in numerous industrial clusters including Ghaziabad, Kanpur, Sahibabad, Meerut (UP or Uttar Pradesh), Mandigobindgarh, Ludhiana, Jalandhar (Punjab), Baddhi, Kaleamb (HP or Himachal Pradesh), Ahmedabad, Rajkot, Surat, Baroda (Gujarat), Gwalior, Indore (MP or Madhya Pradesh), Raipur, Raigarh (Chattisgarh), Sonipat, Hissar, Faridabad (Haryana), J&K, Assam, Meghalya, Bhiwadi, Jaipur, Kota, Ajmer (Rajasthan), Kolkata, Durgapur, Asansol (West Bengal), Jharsuguda, Angul, Cuttack, Jajpur, Rourkela (Odisha), Vizag (Andhra Pradesh), Coimbatore, Chennai (Tamil Nadu), Mumbai, Pune, Nagpur (Maharashtra), Haridwar, Kashipur (Uttrakhand)…..